3 open source boards using the STM32G474RET3
Real designs built with the STM32G474RET3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32${DOC TYPE} Document
EPFLXplore
69.7 × 76.7 mm253 parts6LApache-2.0345
STM32KiBot Project Test
nguyen-v
34 × 28 mm31 parts4LMIT3
STM32Control stage
oresat
40 × 36.5 mm78 parts6LGPL-2.019
The STM32G474RET3 in open source designs
The gallery holds 3 open source boards using the STM32G474RET3 from 3 GitHub repositories; a typical one measures about 40 × 36.5 mm and carries around 78 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is ${DOC TYPE} Document by EPFLXplore.
Parts used alongside the STM32G474RET3
Microcontrollers on boards using the STM32G474RET3
What boards using the STM32G474RET3 are built for
STM32G474RET3: common questions
Where can I find a STM32G474RET3 reference design?
Each of the 3 boards on this page is a real design using the STM32G474RET3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the STM32G474RET3 use?
Most are built on STM32 (3).
How big is a typical board using the STM32G474RET3?
The median is 40 × 36.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the STM32G474RET3?
By GitHub stars, ${DOC TYPE} Document by EPFLXplore, with 345 stars.
Can I simulate one of these boards using the STM32G474RET3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.