7 open source boards using the STM32G474RET3

Real designs built with the STM32G474RET3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the STM32G474RET3

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the STM32G474RET3 connects to, and the resistors, capacitors and other passives placed on it.

  • The VBAT pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF).
  • The VDD pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF).
  • The VREF+ pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 1 µF).
  • The VDDA pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 1 µF).
VBATpin 1Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (8), 1 µF (3), 4.7 µF (1)
PC13pin 2Connected to: Not connected 83% · a signal 17%
PC14pin 3Connected to: Not connected 83% · a signal 17%
PC15pin 4Connected to: Not connected 83% · a signal 17%
PF0pin 5Connected to: Signal 67% · not connected 33%
  • Capacitor to GND on 50% · 3.3 nF (1), 18 pF (1), 27 pF (1)
  • Crystal on 50% · 8 MHz (2)
PF1pin 6Connected to: Not connected 50% · a signal 50%
  • Capacitor to GND on 50% · 3.3 nF (1), 18 pF (1), 27 pF (1)
  • Crystal on 33% · 8 MHz (1)
PG10pin 7Connected to: A connector 83%
  • Capacitor to GND on 67% · 100 nF (4)
  • Pull-up to 3.3V on 33% · 10 kΩ (2)
PC2pin 10Connected to: Not connected 67% · a signal 33%
PC3pin 11Connected to: Not connected 67% · VBUS_SENSE 17% · a signal 17%
VSSpin 15, 31, 47, 63Connected to: GND 100%
VDDpin 16, 32, 48, 64Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (37), 1 µF (7), 4.7 µF (6)
PA4pin 18Connected to: A connector 33% · not connected 33%
  • Pull-up to 3.3V on 33% · 100 kΩ (1), 10 kΩ (1)
PA7pin 21Connected to: Not connected 67% · a signal 33%
PC5pin 23Connected to: Not connected 83% · a signal 17%
PB0pin 24Connected to: Not connected 67% · a signal 33%
PB1pin 25Connected to: Not connected 67% · a signal 33%
PB2pin 26Connected to: Not connected 67% · a signal 33%
VSSApin 27Connected to: GND 100%
VREF+pin 28Connected to: 3.3V 83% · a signal 17%
  • Decoupling capacitor on 83% · 100 nF (12), 1 µF (7), 4.7 µF (3)
VDDApin 29Connected to: 3.3V 83% · a signal 17%
  • Decoupling capacitor on 83% · 100 nF (12), 1 µF (7), 4.7 µF (3)
PB10pin 30Connected to: Not connected 67% · a signal 33%
PB11pin 33Connected to: Not connected 67% · a signal 33%
PB12pin 34Connected to: Signal 67% · not connected 33%
  • Pull-up to 3.3V on 33% · 47 kΩ (1), 10 kΩ (1)
PB14pin 36Connected to: Signal 50% · not connected 33% · VBUS_VSNS 17%
  • Capacitor to GND on 33% · 3.3 nF (1), 10 pF (1)
PC6pin 38Connected to: Signal 67% · not connected 33%
  • Series resistor on 33% · 100 Ω (1), 1 kΩ (1)
  • Resistor to GND on 33% · 100 kΩ (2)
PC7pin 39Connected to: Not connected 67% · a signal 33%
PC8pin 40Connected to: Not connected 67% · a signal 33%
PC9pin 41Connected to: Not connected 67% · a signal 33%
PA8pin 42Connected to: A connector 33%, LP2992IM5-3.3/NOPB 33%
  • Pull-up to 3.3V on 50% · 2 kΩ (2), 100 kΩ (1)
  • Capacitor to GND on 33% · 100 nF (1), 1 µF (1)
PA9pin 43Connected to: A connector 33%, LP2992IM5-3.3/NOPB 33%
  • Pull-up to 3.3V on 67% · 100 kΩ (2), 2 kΩ (2)
  • Capacitor to GND on 33% · 100 nF (1), 1 µF (1)
PC11pin 53Connected to: A connector 33% · not connected 33%
  • Pull-up to 3.3V on 33% · 2 kΩ (1), 10 kΩ (1)
PB6pin 59Connected to: Not connected 67% · a signal 33%
PB7pin 60Connected to: Not connected 67% · a signal 33%
PB8pin 61Connected to: Signal 67% · not connected 33%
  • Resistor to GND on 50% · 10 kΩ (3)
PB9pin 62Connected to: Not connected 67% · a signal 33%

23 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ${DOC TYPE} Document by EPFLXplore, Control stage by oresat, KiBot Project Test by nguyen-v and KiBot Project Test 2 by irshad2013.

The STM32G474RET3 in open source designs

The gallery holds 7 open source boards using the STM32G474RET3 from 7 GitHub repositories; a typical one measures about 54.8 × 56.6 mm and carries around 38 components.

100% use four copper layers or more, and 71% carry an open source license.

The most starred is ${DOC TYPE} Document by EPFLXplore.

Parts used alongside the STM32G474RET3

Microcontrollers on boards using the STM32G474RET3

What boards using the STM32G474RET3 are built for

STM32G474RET3: common questions

Where can I find a STM32G474RET3 reference design?

Each of the 7 boards on this page is a real design using the STM32G474RET3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32G474RET3 VBAT pin?

The VBAT pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the STM32G474RET3.

What decoupling capacitors do designs use on the STM32G474RET3 VDD pin?

The VDD pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the STM32G474RET3.

What decoupling capacitors do designs use on the STM32G474RET3 VREF+ pin?

The VREF+ pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the STM32G474RET3.

Which microcontrollers do boards using the STM32G474RET3 use?

Most are built on STM32 (7).

How big is a typical board using the STM32G474RET3?

The median is 54.8 × 56.6 mm, and 0% are two-layer designs.

What is the most popular open source board using the STM32G474RET3?

By GitHub stars, ${DOC TYPE} Document by EPFLXplore, with 347 stars.

Can I simulate one of these boards using the STM32G474RET3 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part