3 open source boards using the STM32H750VBT6
Real designs built with the STM32H750VBT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32H7value
martinribelotta
63.5 × 73.7 mm60 parts2LNo license12
STM32WeActStudioSTM32H750Guides
XDurango2
49 × 86.9 mm117 parts2LMIT1
STM32Busy toad
giacomo-ascari
180 × 70 mm215 parts4LNo license0
The STM32H750VBT6 in open source designs
The gallery holds 3 open source boards using the STM32H750VBT6 from 3 GitHub repositories; a typical one measures about 63.5 × 73.7 mm and carries around 117 components.
67% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is H7value by martinribelotta.
Microcontrollers on boards using the STM32H750VBT6
What boards using the STM32H750VBT6 are built for
STM32H750VBT6: common questions
Where can I find a STM32H750VBT6 reference design?
Each of the 3 boards on this page is a real design using the STM32H750VBT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the STM32H750VBT6 use?
Most are built on STM32 (3).
How big is a typical board using the STM32H750VBT6?
The median is 63.5 × 73.7 mm, and 67% are two-layer designs.
What is the most popular open source board using the STM32H750VBT6?
By GitHub stars, H7value by martinribelotta, with 12 stars.
Can I simulate one of these boards using the STM32H750VBT6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.