11 open source boards using the TL072CDT
Real designs built with the TL072CDT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
MFOS Eight Stage Phase Shifter - Main
mzuelch
27.9 × 101.6 mm104 parts2LMIT165
VCO
MateoHadzimustafic
53.9 × 64.8 mm82 parts2LApache-2.00- schematic only · 141 parts
POGO
jeffmhopkins
141 partsNo license0 
Abakus Main
69.9 × 108 mm87 parts2LMIT165
Anthracite PCB (Top)
trope-oshw
60 × 102 mm176 parts4LCERN-OHL-S-2.01
VCF Diode Ladder Filter
27.9 × 101.6 mm65 parts2LMIT165
Baby 8
68.6 × 107.3 mm62 parts2LMIT165
AVR/ArduinoHAGIWO Sync LFO Main
29.2 × 101.6 mm50 parts2LMIT165
Buffered Multiple SMD Main
38.1 × 101.6 mm49 parts2LMIT165
Rectifier Main
38.1 × 101.6 mm33 parts2LMIT165
Envelope Follower Main
31.8 × 101.6 mm31 parts2LMIT165
The TL072CDT in open source designs
The gallery holds 11 open source boards using the TL072CDT from 4 GitHub repositories; a typical one measures about 38.1 × 101.6 mm and carries around 65 components.
90% are two-layer designs, the rest use four layers or more, and 91% carry an open source license.
The most starred is MFOS Eight Stage Phase Shifter - Main by mzuelch.
Microcontrollers on boards using the TL072CDT
What boards using the TL072CDT are built for
TL072CDT: common questions
Where can I find a TL072CDT reference design?
Each of the 11 boards on this page is a real design using the TL072CDT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TL072CDT use?
Most are built on AVR/Arduino (1).
How big is a typical board using the TL072CDT?
The median is 38.1 × 101.6 mm, and 90% are two-layer designs.
What is the most popular open source board using the TL072CDT?
By GitHub stars, MFOS Eight Stage Phase Shifter - Main by mzuelch, with 165 stars.
Can I simulate one of these boards using the TL072CDT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.