5 open source boards using the TPD6S300A
Real designs built with the TPD6S300A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Ferret
fullyautomated
50 × 50 mm116 parts4LNo license20
RP2040/RP2350Mainboard
mincrmatt12
136.3 × 71.1 mm160 parts4LMIT11
STM32Reflow Plate Controller
incend1um3
95 × 43 mm73 parts4LCERN-OHL-S-2.02
Nordic nRFUnwired
NoxAevi
29.4 × 61.1 mm83 parts2LGPL-3.01
ESP32Espamp
marmbrus
68.8 × 135.2 mm101 parts4LNo license0
The TPD6S300A in open source designs
The gallery holds 5 open source boards using the TPD6S300A from 5 GitHub repositories; a typical one measures about 68.8 × 61.1 mm and carries around 101 components.
80% use four copper layers or more, and 60% carry an open source license.
The most starred is Ferret by fullyautomated.
Microcontrollers on boards using the TPD6S300A
What boards using the TPD6S300A are built for
TPD6S300A: common questions
Where can I find a TPD6S300A reference design?
Each of the 5 boards on this page is a real design using the TPD6S300A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TPD6S300A use?
Most are built on STM32 (2), ESP32 (1), Nordic nRF (1) and RP2040/RP2350 (1).
How big is a typical board using the TPD6S300A?
The median is 68.8 × 61.1 mm, and 20% are two-layer designs.
What is the most popular open source board using the TPD6S300A?
By GitHub stars, Ferret by fullyautomated, with 20 stars.
Can I simulate one of these boards using the TPD6S300A before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.