6 open source boards using the TPD6S300A

Real designs built with the TPD6S300A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the TPD6S300A

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TPD6S300A connects to, and the resistors, capacitors and other passives placed on it.

  • The VBIAS_3 pin has a capacitor to GND on 6 of 6 designs, most often 100 nF.
  • The VPWR_10 pin has a decoupling capacitor on 6 of 6 designs, most often 1 µF (then 10 µF).
VBIAS_3pin 3Connected to: Signal 100%
  • Capacitor to GND on 100% · 100 nF (6)
GND_8pin 8Connected to: GND 100%
FLT_9pin 9Connected to: Signal 67% · not connected 33%
  • Pull-up to 3.3V on 33% · 100 kΩ (2)
VPWR_10pin 10Connected to: 3.3V 83% · a signal 17%
  • Decoupling capacitor on 100% · 1 µF (5), 10 µF (3), 100 nF (2)
GND_13pin 13Connected to: GND 100%
GND_16pin 16Connected to: GND 100%
GND_17pin 17Connected to: GND 100%
GND_18pin 18Connected to: GND 100%
GND_21pin 21Connected to: GND 100%

12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ferret by fullyautomated, Mainboard by mincrmatt12, Reflow Plate Controller by incend1um3 and Unwired by NoxAevi.

The TPD6S300A in open source designs

The gallery holds 6 open source boards using the TPD6S300A from 6 GitHub repositories; a typical one measures about 66.2 × 66.1 mm and carries around 99 components.

83% use four copper layers or more, and 67% carry an open source license.

The most starred is Ferret by fullyautomated.

Microcontrollers on boards using the TPD6S300A

What boards using the TPD6S300A are built for

TPD6S300A: common questions

Where can I find a TPD6S300A reference design?

Each of the 6 boards on this page is a real design using the TPD6S300A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPD6S300A VBIAS_3 pin connected?

The VBIAS_3 pin has a capacitor to GND on 6 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the TPD6S300A.

What decoupling capacitors do designs use on the TPD6S300A VPWR_10 pin?

The VPWR_10 pin has a decoupling capacitor on 6 of 6 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the TPD6S300A.

Which microcontrollers do boards using the TPD6S300A use?

Most are built on ESP32 (2), STM32 (2), Nordic nRF (1) and RP2040/RP2350 (1).

How big is a typical board using the TPD6S300A?

The median is 66.2 × 66.1 mm, and 17% are two-layer designs.

What is the most popular open source board using the TPD6S300A?

By GitHub stars, Ferret by fullyautomated, with 20 stars.

Can I simulate one of these boards using the TPD6S300A before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part