8 open source boards using the TPS563201
Real designs built with the TPS563201, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Asm2364
Stanlazy
22 × 43.5 mm106 parts4LGPL-3.07
RP2040/RP2350Ppse hardware
4137314
102.2 × 77.2 mm134 parts2LGPL-3.01
ESP32MADHEX-v2
DEFOR111
53 × 85 mm75 parts4LNo license1
ESP32Esp av
smkent
100 × 66 mm145 parts2LCC-BY-SA-4.00
ESP32Blynk
DynamicWhiteHat
80.5 × 53.9 mm100 parts2LNo license0
Ip5306-ups
103.1 × 38.1 mm55 parts2LCC-BY-SA-4.00
ESP32Esp-3dp
66 × 32 mm53 parts2LCC-BY-SA-4.00
ESP32Esp cwww
66 × 32 mm47 parts2LCC-BY-SA-4.00
The TPS563201 in open source designs
The gallery holds 8 open source boards using the TPS563201 from 5 GitHub repositories; a typical one measures about 73.3 × 48.7 mm and carries around 88 components.
75% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is Asm2364 by Stanlazy.
Parts used alongside the TPS563201
Microcontrollers on boards using the TPS563201
What boards using the TPS563201 are built for
TPS563201: common questions
Where can I find a TPS563201 reference design?
Each of the 8 boards on this page is a real design using the TPS563201. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the TPS563201?
The USBLC6-2P6, ESP32-S3-WROOM-1 and INA226 appear in the most repositories here.
Which microcontrollers do boards using the TPS563201 use?
Most are built on ESP32 (5) and RP2040/RP2350 (1).
How big is a typical board using the TPS563201?
The median is 73.3 × 48.7 mm, and 75% are two-layer designs.
What is the most popular open source board using the TPS563201?
By GitHub stars, Asm2364 by Stanlazy, with 7 stars.
Can I simulate one of these boards using the TPS563201 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.