2 open source boards using the TPS564242DRLR
Real designs built with the TPS564242DRLR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32RPI5-CFE-Hat
will127534
65 × 56 mm44 parts4LMIT25
STM32NoNameComputer-2.0
PlanAndBuild
40 × 100 mm107 parts4LNo license2
The TPS564242DRLR in open source designs
The gallery holds 2 open source boards using the TPS564242DRLR from 2 GitHub repositories; a typical one measures about 52.5 × 78 mm and carries around 76 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is RPI5-CFE-Hat by will127534.
Microcontrollers on boards using the TPS564242DRLR
What boards using the TPS564242DRLR are built for
TPS564242DRLR: common questions
Where can I find a TPS564242DRLR reference design?
Each of the 2 boards on this page is a real design using the TPS564242DRLR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TPS564242DRLR use?
Most are built on STM32 (2).
How big is a typical board using the TPS564242DRLR?
The median is 52.5 × 78 mm, and 0% are two-layer designs.
What is the most popular open source board using the TPS564242DRLR?
By GitHub stars, RPI5-CFE-Hat by will127534, with 25 stars.
Can I simulate one of these boards using the TPS564242DRLR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.