5 open source boards using the TPS564242DRLR
Real designs built with the TPS564242DRLR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
RPI5-CFE-Hat
will127534
65 × 56 mm44 parts4LMIT25STM32
NoNameComputer-2.0
PlanAndBuild
40 × 100 mm107 parts4LNo license2JAARK
elitetq
100 × 90 mm35 parts2LNo license1- schematic only · 562 partsRaspberry Pi
OpenXTCM5-Head-Unit
mibs510
562 parts2LMIT0 Raspberry Pi
Ground station
ShaneTWilliams
65 × 59.5 mm117 parts4LNo license3
The TPS564242DRLR in open source designs
The gallery holds 5 open source boards using the TPS564242DRLR from 5 GitHub repositories; a typical one measures about 65 × 74.8 mm and carries around 107 components.
60% use four copper layers or more, and 40% carry an open source license.
The most starred is RPI5-CFE-Hat by will127534.
Microcontrollers on boards using the TPS564242DRLR
What boards using the TPS564242DRLR are built for
TPS564242DRLR: common questions
Where can I find a TPS564242DRLR reference design?
Each of the 5 boards on this page is a real design using the TPS564242DRLR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TPS564242DRLR use?
Most are built on Raspberry Pi (2) and STM32 (2).
How big is a typical board using the TPS564242DRLR?
The median is 65 × 74.8 mm, and 40% are two-layer designs.
What is the most popular open source board using the TPS564242DRLR?
By GitHub stars, RPI5-CFE-Hat by will127534, with 25 stars.
Can I simulate one of these boards using the TPS564242DRLR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.