7 open source boards using the TXB0104D
Real designs built with the TXB0104D, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
DonCon2040
ravinrabbid
130.8 × 58.4 mm99 parts2LMIT64
PICBellwether
floren
60 × 40 mm14 parts2LCC-BY-NC-4.016
AVR/ArduinoMmM
wyolum
99 × 80 mm162 parts2LNo license2
AVR/ArduinoFull Circuit
EthanSousaProjects
110 × 110 mm72 parts2LGPL-3.00
RP2040/RP2350DonConIOmini
54 × 64 mm89 parts2LMIT64
Beacon pll
CalPolySpaceSystems
88.7 × 39 mm52 parts2LNo license0
STM32X1
embeddedalpha
30 × 80 mm57 parts2LMIT75
The TXB0104D in open source designs
The gallery holds 7 open source boards using the TXB0104D from 6 GitHub repositories; a typical one measures about 88.7 × 64 mm and carries around 72 components.
100% are two-layer designs, the rest use four layers or more, and 57% carry an open source license.
The most starred is X1 by embeddedalpha.
Microcontrollers on boards using the TXB0104D
What boards using the TXB0104D are built for
TXB0104D: common questions
Where can I find a TXB0104D reference design?
Each of the 7 boards on this page is a real design using the TXB0104D. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TXB0104D use?
Most are built on AVR/Arduino (2), PIC (1), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the TXB0104D?
The median is 88.7 × 64 mm, and 100% are two-layer designs.
What is the most popular open source board using the TXB0104D?
By GitHub stars, X1 by embeddedalpha, with 75 stars.
Can I simulate one of these boards using the TXB0104D before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.