2 open source boards using the 12V
Real designs built with the 12V, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Avr door controller
AlbanBedel
121 × 70 mm67 parts2LNo license10Hw micropow
aw
44 × 22 mm12 parts2LCC-BY-SA-4.01
The 12V in open source designs
The gallery holds 2 open source boards using the 12V from 2 GitHub repositories; a typical one measures about 82.5 × 46 mm and carries around 40 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Avr door controller by AlbanBedel.
Parts used alongside the 12V
What boards using the 12V are built for
12V: common questions
Where can I find a 12V reference design?
Each of the 2 boards on this page is a real design using the 12V. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the 12V?
The median is 82.5 × 46 mm, and 100% are two-layer designs.
What is the most popular open source board using the 12V?
By GitHub stars, Avr door controller by AlbanBedel, with 10 stars.
Can I simulate one of these boards using the 12V before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.