7 open source boards using the 24LC00
Real designs built with the 24LC00, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Vaio re
CRImier
75 × 65 mm274 parts4LGPL-3.0254Pillcase36
Pekaso
114 × 140.5 mm80 parts2LMIT9STM32
Bread board
cr1tbit
100 × 77 mm224 parts4LNo license0STM32
Sem forrasztos
adam-jkb
115 × 70.6 mm84 parts2LNo license0ESP32
Booth
Lavapeeble
76.8 × 43.7 mm50 parts4LNo license0ESP32
Hubby
cr1tbit
100 × 77 mm212 parts4LNo license0CacheModule
ehbc-project
118.1 × 24.1 mm28 parts2LNo license0
How designs wire the 24LC00
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 24LC00 connects to, and the resistors, capacitors and other passives placed on it.
- The A0 pin is tied to GND on 5 of 6 designs.
- The A1 pin is tied to GND on 5 of 6 designs.
- The A2 pin is tied to GND on 5 of 6 designs.
- The SDA pin has a pull-up to 3.3V on 4 of 6 designs, most often 10 kΩ (then 4.7 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| A0pin 1 | Connected to: GND 83% · 3.3V 17% | — |
| A1pin 2 | Connected to: GND 83% · 3.3V 17% | — |
| A2pin 3 | Connected to: GND 83% · 3.3V 17% | — |
| GNDpin 4 | Connected to: GND 100% | — |
| SDApin 5 | Connected to: The microcontroller 50%, a connector 33% |
|
| SCLpin 6 | Connected to: The microcontroller 50%, a connector 33% |
|
| WPpin 7 | Connected to: GND 67% · a signal 33% | — |
| VCCpin 8 | Connected to: 3.3V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Vaio re by CRImier, Pillcase36 by Pekaso, Sem forrasztos by adam-jkb and Bread board by cr1tbit.
The 24LC00 in open source designs
The gallery holds 7 open source boards using the 24LC00 from 6 GitHub repositories; a typical one measures about 100 × 70.6 mm and carries around 84 components.
57% use four copper layers or more, and 29% carry an open source license.
The most starred is Vaio re by CRImier.
Parts used alongside the 24LC00
Microcontrollers on boards using the 24LC00
What boards using the 24LC00 are built for
24LC00: common questions
Where can I find a 24LC00 reference design?
Each of the 7 boards on this page is a real design using the 24LC00. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 24LC00 A0 pin connected?
The A0 pin is tied to GND on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the 24LC00.
How is the 24LC00 A1 pin connected?
The A1 pin is tied to GND on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the 24LC00.
How is the 24LC00 A2 pin connected?
The A2 pin is tied to GND on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the 24LC00.
Which microcontrollers do boards using the 24LC00 use?
Most are built on ESP32 (2), STM32 (2) and RP2040/RP2350 (1).
How big is a typical board using the 24LC00?
The median is 100 × 70.6 mm, and 43% are two-layer designs.
What is the most popular open source board using the 24LC00?
By GitHub stars, Vaio re by CRImier, with 254 stars.
Can I simulate one of these boards using the 24LC00 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.