2 open source boards using the 24LC08B-E/MS

Real designs built with the 24LC08B-E/MS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filtersOpen license only|Most starred Recently updated Most components

The 24LC08B-E/MS in open source designs

The gallery holds 2 open source boards using the 24LC08B-E/MS from 2 GitHub repositories; a typical one measures about 160 × 100 mm and carries around 620 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is ETH1CFGEN1 by BehrensG.

Microcontrollers on boards using the 24LC08B-E/MS

STM32 2

24LC08B-E/MS: common questions

Where can I find a 24LC08B-E/MS reference design?

Each of the 2 boards on this page is a real design using the 24LC08B-E/MS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the 24LC08B-E/MS use?

Most are built on STM32 (2).

How big is a typical board using the 24LC08B-E/MS?

The median is 160 × 100 mm, and 0% are two-layer designs.

What is the most popular open source board using the 24LC08B-E/MS?

By GitHub stars, ETH1CFGEN1 by BehrensG, with 0 stars.

Can I simulate one of these boards using the 24LC08B-E/MS before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.