3 open source boards using the 24LC256-I/SN

Real designs built with the 24LC256-I/SN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The 24LC256-I/SN in open source designs

The gallery holds 3 open source boards using the 24LC256-I/SN from 2 GitHub repositories; a typical one measures about 70 × 45 mm and carries around 77 components.

67% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is EEG-I-LAB by Tahacrpc.

Microcontrollers on boards using the 24LC256-I/SN

What boards using the 24LC256-I/SN are built for

24LC256-I/SN: common questions

Where can I find a 24LC256-I/SN reference design?

Each of the 3 boards on this page is a real design using the 24LC256-I/SN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the 24LC256-I/SN use?

Most are built on AVR/Arduino (2).

How big is a typical board using the 24LC256-I/SN?

The median is 70 × 45 mm, and 67% are two-layer designs.

What is the most popular open source board using the 24LC256-I/SN?

By GitHub stars, EEG-I-LAB by Tahacrpc, with 1 stars.

Can I simulate one of these boards using the 24LC256-I/SN before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part