5 open source boards using the 4027

Real designs built with the 4027, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the 4027

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 4027 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF.
  • The R pins is tied to GND on 60% of them (a signal on 3).
  • The S pins is tied to GND on 60% of them (15V on 2, a signal on 2).
  • The Q pins have a series resistor on 2 of 5 designs, most often 270 Ω (then 100 Ω).
Qpin 1, 2, 14, 15Connected to: Not connected 55% · a signal 45%
  • Series resistor on 40% · 270 Ω (4), 100 Ω (1)
Rpin 4, 12Connected to: GND 60% · a signal 30%
  • Resistor to GND on 40% · 10 kΩ (2), 4.7 kΩ (1)
Spin 7, 9Connected to: GND 60% · 15V 20% · a signal 20%
VSSpin 8Connected to: GND 100%
VDDpin 16Connected to: VCC 100%
  • Decoupling capacitor on 100% · 100 nF (4)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Half bridge by profdc9, Ampmeter clock by Sirawit7205, CLOCK by Trilobyte-CPU and Jkf by 0x007E.

The 4027 in open source designs

The gallery holds 5 open source boards using the 4027 from 5 GitHub repositories; a typical one measures about 77.5 × 72.4 mm and carries around 74 components.

60% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.

The most starred is Half bridge by profdc9.

Parts used alongside the 4027

What boards using the 4027 are built for

4027: common questions

Where can I find a 4027 reference design?

Each of the 5 boards on this page is a real design using the 4027. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 4027 VDD pin?

The VDD pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the 4027.

How is the 4027 R pin connected?

The R pins is tied to GND on 60% of them (a signal on 3). Counted from the KiCad layouts of 5 open source designs using the 4027.

How is the 4027 S pin connected?

The S pins is tied to GND on 60% of them (15V on 2, a signal on 2). Counted from the KiCad layouts of 5 open source designs using the 4027.

How big is a typical board using the 4027?

The median is 77.5 × 72.4 mm, and 60% are two-layer designs.

What is the most popular open source board using the 4027?

By GitHub stars, Half bridge by profdc9, with 56 stars.

Can I simulate one of these boards using the 4027 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part