5 open source boards using the 74AHCT1G04
Real designs built with the 74AHCT1G04, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Silicon Labs
DSMR-Splitter
basilfx
59.9 × 39.9 mm53 parts2LCC-BY-NC-4.07Atari SBC
dpicken
101.6 × 101.6 mm112 parts4LMIT6Radio usb interface
SP8EBC
127 × 90 mm200 parts2LNo license3GCM
JonathSpirit
203 × 116 mm123 parts4LCERN-OHL-W-2.03AOS16 Double Buffer
AJain9199
50 × 75 mm63 parts4LNo license1
How designs wire the 74AHCT1G04
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74AHCT1G04 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 is left unconnected on 5 of 5 designs.
- The VCC pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF.
- Pin 2 has a pull-up to 5V on 2 of 5 designs, most often 1 kΩ.
- Pin 2 has a series resistor on 2 of 5 designs, most often 33 Ω (then 2.2 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: Not connected 100% | — |
| Pin 2 | Connected to: Signal 100% |
|
| GNDpin 3 | Connected to: GND 100% | — |
| VCCpin 5 | Connected to: 5V 100% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DSMR-Splitter by basilfx, Atari SBC by dpicken, GCM by JonathSpirit and Radio usb interface by SP8EBC.
The 74AHCT1G04 in open source designs
The gallery holds 5 open source boards using the 74AHCT1G04 from 5 GitHub repositories; a typical one measures about 101.6 × 90 mm and carries around 112 components.
60% use four copper layers or more, and 40% carry an open source license.
The most starred is DSMR-Splitter by basilfx.
Microcontrollers on boards using the 74AHCT1G04
What boards using the 74AHCT1G04 are built for
74AHCT1G04: common questions
Where can I find a 74AHCT1G04 reference design?
Each of the 5 boards on this page is a real design using the 74AHCT1G04. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74AHCT1G04 pin 1 connected?
Pin 1 is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 74AHCT1G04.
What decoupling capacitors do designs use on the 74AHCT1G04 VCC pin?
The VCC pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the 74AHCT1G04.
What pull-up resistor is used on the 74AHCT1G04 pin 2?
Pin 2 has a pull-up to 5V on 2 of 5 designs, most often 1 kΩ. Counted from the KiCad layouts of 5 open source designs using the 74AHCT1G04.
Which microcontrollers do boards using the 74AHCT1G04 use?
Most are built on Silicon Labs (1).
How big is a typical board using the 74AHCT1G04?
The median is 101.6 × 90 mm, and 40% are two-layer designs.
What is the most popular open source board using the 74AHCT1G04?
By GitHub stars, DSMR-Splitter by basilfx, with 7 stars.
Can I simulate one of these boards using the 74AHCT1G04 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.