5 open source boards using the 74AHCT1G32

Real designs built with the 74AHCT1G32, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the 74AHCT1G32

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74AHCT1G32 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 10 nF).
  • Pin 4 has a pull-up to 3.3V on 2 of 5 designs, most often 10 kΩ (then 1 kΩ).
GNDpin 3Connected to: GND 100%
Pin 4Connected to: Signal 80% · not connected 20%
  • Pull-up to 3.3V on 40% · 10 kΩ (1), 1 kΩ (1)
VCCpin 5Connected to: 5V 100%
  • Decoupling capacitor on 80% · 100 nF (6), 10 nF (2)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Index - Ring Light by opulo-inc, Schwim repacked by hkzlab, Granit by laenzlinger and AOS16 Double Buffer by AJain9199.

The 74AHCT1G32 in open source designs

The gallery holds 5 open source boards using the 74AHCT1G32 from 5 GitHub repositories; a typical one measures about 50 × 75 mm and carries around 57 components.

60% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.

The most starred is Index - Ring Light by opulo-inc.

Microcontrollers on boards using the 74AHCT1G32

What boards using the 74AHCT1G32 are built for

74AHCT1G32: common questions

Where can I find a 74AHCT1G32 reference design?

Each of the 5 boards on this page is a real design using the 74AHCT1G32. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74AHCT1G32 VCC pin?

The VCC pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 5 open source designs using the 74AHCT1G32.

What pull-up resistor is used on the 74AHCT1G32 pin 4?

Pin 4 has a pull-up to 3.3V on 2 of 5 designs, most often 10 kΩ (then 1 kΩ). Counted from the KiCad layouts of 5 open source designs using the 74AHCT1G32.

Which microcontrollers do boards using the 74AHCT1G32 use?

Most are built on Raspberry Pi (1) and RP2040/RP2350 (1).

How big is a typical board using the 74AHCT1G32?

The median is 50 × 75 mm, and 60% are two-layer designs.

What is the most popular open source board using the 74AHCT1G32?

By GitHub stars, Index - Ring Light by opulo-inc, with 3,655 stars.

Can I simulate one of these boards using the 74AHCT1G32 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part