5 open source boards using the 74HCT245PW

Real designs built with the 74HCT245PW, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the 74HCT245PW

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74HCT245PW connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF (then 2.2 µF).
  • The A->B pin is tied to 5V on 3 of 5 designs.
  • The CE pin has a pull-up to 3.3V on 2 of 5 designs, most often 10 kΩ (then 1 kΩ).
A->Bpin 1Connected to: 5V 60% · GND 20% · a signal 20%
GNDpin 10Connected to: GND 100%
CEpin 19Connected to: The microcontroller 40% · GND 40%
  • Pull-up to 3.3V on 40% · 10 kΩ (1), 1 kΩ (1)
VCCpin 20Connected to: 5V 100%
  • Decoupling capacitor on 60% · 100 nF (3), 2.2 µF (2)

16 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include BusPirate-5-rev10 by DangerousPrototypes, RAM128 by garrettsworkshop, Mod1base by semianalog and Rt hw v1 by ahsanu123.

The 74HCT245PW in open source designs

The gallery holds 5 open source boards using the 74HCT245PW from 5 GitHub repositories; a typical one measures about 74.2 × 60 mm and carries around 110 components.

60% use four copper layers or more, and 60% carry an open source license.

The most starred is BusPirate-5-rev10 by DangerousPrototypes.

Microcontrollers on boards using the 74HCT245PW

What boards using the 74HCT245PW are built for

74HCT245PW: common questions

Where can I find a 74HCT245PW reference design?

Each of the 5 boards on this page is a real design using the 74HCT245PW. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74HCT245PW VCC pin?

The VCC pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 5 open source designs using the 74HCT245PW.

How is the 74HCT245PW A->B pin connected?

The A->B pin is tied to 5V on 3 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 74HCT245PW.

What pull-up resistor is used on the 74HCT245PW CE pin?

The CE pin has a pull-up to 3.3V on 2 of 5 designs, most often 10 kΩ (then 1 kΩ). Counted from the KiCad layouts of 5 open source designs using the 74HCT245PW.

Which microcontrollers do boards using the 74HCT245PW use?

Most are built on ESP32 (2), RP2040/RP2350 (1) and Microchip SAM (1).

How big is a typical board using the 74HCT245PW?

The median is 74.2 × 60 mm, and 40% are two-layer designs.

What is the most popular open source board using the 74HCT245PW?

By GitHub stars, BusPirate-5-rev10 by DangerousPrototypes, with 124 stars.

Can I simulate one of these boards using the 74HCT245PW before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part