5 open source boards using the 74LS121
Real designs built with the 74LS121, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
EE-83-PulseGen
eyalo-dev
146.1 × 75.6 mm50 parts2LNo license0SintetizadorGuidoStolfi
ArqueologiaDigital
153.2 × 95.2 mm46 parts2LNo license0Cpu01
felge1966
170.2 × 95.3 mm33 parts2LAGPL-3.00GIMIX Mainboard
roberto314
482.6 × 228.6 mm80 parts2LBSD-2-Clause1ACE-COLOUR2
flypie
165.1 × 114.3 mm95 parts2LGPL-3.013
How designs wire the 74LS121
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74LS121 connects to, and the resistors, capacitors and other passives placed on it.
- The R/CEXT pin has a series capacitor on 5 of 5 designs, most often 1 nF (then 100 nF).
- Pin 2 is left unconnected on 5 of 5 designs.
- Pin 8 is left unconnected on 5 of 5 designs.
- Pin 12 is left unconnected on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Qpin 1, 6 | Connected to: 74LS00 20%, 74LS04 20% · not connected 30% |
|
| Pin 2 | Connected to: Not connected 100% | — |
| GNDpin 7 | Connected to: GND 100% | — |
| Pin 8 | Connected to: Not connected 100% | — |
| RINTpin 9 | Connected to: Not connected 80% · 5V 20% | — |
| CEXTpin 10 | Connected to: Signal 100% |
|
| R/CEXTpin 11 | Connected to: Signal 100% |
|
| Pin 12 | Connected to: Not connected 100% | — |
| Pin 13 | Connected to: Not connected 100% | — |
| VCCpin 14 | Connected to: VCC 100% | — |
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ACE-COLOUR2 by flypie, GIMIX Mainboard by roberto314, SintetizadorGuidoStolfi by ArqueologiaDigital and EE-83-PulseGen by eyalo-dev.
The 74LS121 in open source designs
The gallery holds 5 open source boards using the 74LS121 from 5 GitHub repositories; a typical one measures about 165.1 × 95.3 mm and carries around 50 components.
100% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is ACE-COLOUR2 by flypie.
What boards using the 74LS121 are built for
74LS121: common questions
Where can I find a 74LS121 reference design?
Each of the 5 boards on this page is a real design using the 74LS121. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74LS121 R/CEXT pin connected?
The R/CEXT pin has a series capacitor on 5 of 5 designs, most often 1 nF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the 74LS121.
How is the 74LS121 pin 2 connected?
Pin 2 is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 74LS121.
How is the 74LS121 pin 8 connected?
Pin 8 is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 74LS121.
How big is a typical board using the 74LS121?
The median is 165.1 × 95.3 mm, and 100% are two-layer designs.
What is the most popular open source board using the 74LS121?
By GitHub stars, ACE-COLOUR2 by flypie, with 13 stars.
Can I simulate one of these boards using the 74LS121 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.