4 open source boards using the 74LVC1G10
Real designs built with the 74LVC1G10, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP8266
MG ZS V2
damienmaguire
180 × 120 mm161 parts4LGPL-3.016ESP32
SenseEHajo
ehajo
141 × 56.9 mm97 parts2LNo license5PingBoard
PingTechGmbH
87.6 × 25.4 mm23 parts2LMIT3RP2040/RP2350
Ack-Rover Controller
AESilky
108.7 × 111.8 mm104 parts4LNo license0
The 74LVC1G10 in open source designs
The gallery holds 4 open source boards using the 74LVC1G10 from 4 GitHub repositories; a typical one measures about 124.8 × 84.3 mm and carries around 101 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is MG ZS V2 by damienmaguire.
Parts used alongside the 74LVC1G10
Microcontrollers on boards using the 74LVC1G10
What boards using the 74LVC1G10 are built for
74LVC1G10: common questions
Where can I find a 74LVC1G10 reference design?
Each of the 4 boards on this page is a real design using the 74LVC1G10. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the 74LVC1G10 use?
Most are built on ESP32 (1), ESP8266 (1) and RP2040/RP2350 (1).
How big is a typical board using the 74LVC1G10?
The median is 124.8 × 84.3 mm, and 50% are two-layer designs.
What is the most popular open source board using the 74LVC1G10?
By GitHub stars, MG ZS V2 by damienmaguire, with 16 stars.
Can I simulate one of these boards using the 74LVC1G10 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.