11 open source boards using the 74LVC2G34
Real designs built with the 74LVC2G34, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP8266
MG ZS V2
damienmaguire
180 × 120 mm161 parts4LGPL-3.016Microchip SAM
Duet 3 Mini 5+ Ethernet
Duet3D
100 × 123 mm408 parts4LCustom license12FPGA
Bkm-68x simple
skumlos
230.4 × 233.5 mm206 parts2LCERN-OHL-W-2.07Cok-001
stonedDiscord
313.3 × 237 mm1243 parts2LNo license2AA PwrSens Dist
AESilky
147.3 × 154.4 mm135 parts2LNo license0Microchip SAM
Duet3 MB
Duet3D
134 × 140 mm642 parts4LCustom license50ESP32
Duet 3 Mini 5+ Wifi
Duet3D
100 × 123 mm407 parts4LCustom license12Microchip SAM
Duet3 MB
ReadHeadRedemption
134 × 140 mm642 parts4LNo license0RP2040/RP2350
Ack-Rover Controller
AESilky
108.7 × 111.8 mm104 parts4LNo license0Aesa test
tieziyun
100 × 90 mm62 parts2LNo license0Encodeurs-DFRobotics
INSA-GEI
20.5 × 20 mm12 parts2LGPL-3.09
How designs wire the 74LVC2G34
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the 74LVC2G34 connects to, and the resistors, capacitors and other passives placed on it.
- The VO pin is tied to GND on 8 of 9 designs.
- The VCC_5 pin has a decoupling capacitor on 5 of 8 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: A connector 33% |
|
| VOpin 2 | Connected to: GND 89% | — |
| Pin 4 | Connected to: The microcontroller 38% |
|
| VCC_5pin 5 | Connected to: 3.3V 100% |
|
| Pin 6 | Connected to: The microcontroller 38%, a connector 25% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Duet3 MB by Duet3D, MG ZS V2 by damienmaguire, Duet 3 Mini 5+ Ethernet by Duet3D and Encodeurs-DFRobotics by INSA-GEI.
The 74LVC2G34 in open source designs
The gallery holds 11 open source boards using the 74LVC2G34 from 9 GitHub repositories; a typical one measures about 134 × 123 mm and carries around 206 components.
55% use four copper layers or more, and 27% carry an open source license.
The most starred is Duet3 MB by Duet3D.
Parts used alongside the 74LVC2G34
Microcontrollers on boards using the 74LVC2G34
What boards using the 74LVC2G34 are built for
74LVC2G34: common questions
Where can I find a 74LVC2G34 reference design?
Each of the 11 boards on this page is a real design using the 74LVC2G34. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74LVC2G34 VO pin connected?
The VO pin is tied to GND on 8 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the 74LVC2G34.
What decoupling capacitors do designs use on the 74LVC2G34 VCC_5 pin?
The VCC_5 pin has a decoupling capacitor on 5 of 8 designs, most often 100 nF. Counted from the KiCad layouts of 9 open source designs using the 74LVC2G34.
What parts are used alongside the 74LVC2G34?
The 74HCT365, KSZ8081RNACA, MCP2542, TS30041 and 74AHCT1G125 appear in the most repositories here.
Which microcontrollers do boards using the 74LVC2G34 use?
Most are built on Microchip SAM (3), ESP32 (1), ESP8266 (1) and FPGA (1).
How big is a typical board using the 74LVC2G34?
The median is 134 × 123 mm, and 45% are two-layer designs.
What is the most popular open source board using the 74LVC2G34?
By GitHub stars, Duet3 MB by Duet3D, with 50 stars.
Can I simulate one of these boards using the 74LVC2G34 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.