3 open source boards using the 8086_Min_Mode

Real designs built with the 8086_Min_Mode, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The 8086_Min_Mode in open source designs

The gallery holds 3 open source boards using the 8086_Min_Mode from 3 GitHub repositories; a typical one measures about 99.9 × 80 mm and carries around 126 components.

67% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.

The most starred is Xt8086 alpha by rh1tech.

Parts used alongside the 8086_Min_Mode

Microcontrollers on boards using the 8086_Min_Mode

What boards using the 8086_Min_Mode are built for

8086_Min_Mode: common questions

Where can I find a 8086_Min_Mode reference design?

Each of the 3 boards on this page is a real design using the 8086_Min_Mode. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the 8086_Min_Mode?

The MP1584EN-LF-Z, SN74LS04N, SN74LS74ANE4 and USBLC6-2SC6 appear in the most repositories here.

Which microcontrollers do boards using the 8086_Min_Mode use?

Most are built on RP2040/RP2350 (1).

How big is a typical board using the 8086_Min_Mode?

The median is 99.9 × 80 mm, and 67% are two-layer designs.

What is the most popular open source board using the 8086_Min_Mode?

By GitHub stars, Xt8086 alpha by rh1tech, with 65 stars.

Can I simulate one of these boards using the 8086_Min_Mode before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part