6 open source boards using the AD5941BCPZ-RL7
Real designs built with the AD5941BCPZ-RL7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Eis capstone
stevfu
102 × 45 mm39 parts2LMIT1ESP32
Terasaki V.1
Kiya86
140.5 × 58.6 mm76 parts4LNo license0RP2040/RP2350
SteiStat
mabooo18
45 × 60 mm31 parts2LNo license0ESP32
FPCB
Kiya86
50 × 70 mm74 parts2LNo license0ESP32
FMN potentiostat
Kiya86
30 × 60 mm50 parts4LNo license0ESP32
Logic Board
Kiya86
45.3 × 45.3 mm43 parts4LNo license0
The AD5941BCPZ-RL7 in open source designs
The gallery holds 6 open source boards using the AD5941BCPZ-RL7 from 3 GitHub repositories; a typical one measures about 47.6 × 59.3 mm and carries around 47 components.
50% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.
The most starred is Eis capstone by stevfu.
Microcontrollers on boards using the AD5941BCPZ-RL7
What boards using the AD5941BCPZ-RL7 are built for
AD5941BCPZ-RL7: common questions
Where can I find a AD5941BCPZ-RL7 reference design?
Each of the 6 boards on this page is a real design using the AD5941BCPZ-RL7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AD5941BCPZ-RL7 use?
Most are built on ESP32 (5) and RP2040/RP2350 (1).
How big is a typical board using the AD5941BCPZ-RL7?
The median is 47.6 × 59.3 mm, and 50% are two-layer designs.
What is the most popular open source board using the AD5941BCPZ-RL7?
By GitHub stars, Eis capstone by stevfu, with 1 stars.
Can I simulate one of these boards using the AD5941BCPZ-RL7 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.