4 open source boards using the AD630ARZ
Real designs built with the AD630ARZ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
EIT-Machine
Alberta2514640
200 × 130 mm356 parts4LNo license1ESP32
ESP32Sensor
LESA-RPI
154.1 × 74 mm94 parts4LNo license1STM32
SG-3
ttosu25
132.7 × 89.6 mm93 parts4LNo license0ESP32
ESP32Sensor-Sensor board
LESA-RPI
38 × 60 mm86 parts4LNo license1
The AD630ARZ in open source designs
The gallery holds 4 open source boards using the AD630ARZ from 3 GitHub repositories; a typical one measures about 143.4 × 81.8 mm and carries around 94 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is EIT-Machine by Alberta2514640.
Microcontrollers on boards using the AD630ARZ
What boards using the AD630ARZ are built for
AD630ARZ: common questions
Where can I find a AD630ARZ reference design?
Each of the 4 boards on this page is a real design using the AD630ARZ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AD630ARZ use?
Most are built on ESP32 (2), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the AD630ARZ?
The median is 143.4 × 81.8 mm, and 0% are two-layer designs.
What is the most popular open source board using the AD630ARZ?
By GitHub stars, EIT-Machine by Alberta2514640, with 1 stars.
Can I simulate one of these boards using the AD630ARZ before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.