2 open source boards using the AD8605ARTZ
Real designs built with the AD8605ARTZ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
ChrisBox
TUDA-MUST
78 × 46.3 mm177 parts4LCC-BY-4.06RP2040/RP2350
Sensor board
TrendBit
40 × 70 mm205 parts4LGPL-3.00
The AD8605ARTZ in open source designs
The gallery holds 2 open source boards using the AD8605ARTZ from 2 GitHub repositories; a typical one measures about 59 × 58.2 mm and carries around 191 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is ChrisBox by TUDA-MUST.
Microcontrollers on boards using the AD8605ARTZ
AD8605ARTZ: common questions
Where can I find a AD8605ARTZ reference design?
Each of the 2 boards on this page is a real design using the AD8605ARTZ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AD8605ARTZ use?
Most are built on ESP32 (1) and RP2040/RP2350 (1).
How big is a typical board using the AD8605ARTZ?
The median is 59 × 58.2 mm, and 0% are two-layer designs.
What is the most popular open source board using the AD8605ARTZ?
By GitHub stars, ChrisBox by TUDA-MUST, with 6 stars.
Can I simulate one of these boards using the AD8605ARTZ before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.