2 open source boards using the ADC122S051

Real designs built with the ADC122S051, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The ADC122S051 in open source designs

The gallery holds 2 open source boards using the ADC122S051 from 2 GitHub repositories; a typical one measures about 140 × 85.2 mm and carries around 67 components.

100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Kicking Device v13b by TIGERs-Mannheim.

Parts used alongside the ADC122S051

ADC122S051: common questions

Where can I find a ADC122S051 reference design?

Each of the 2 boards on this page is a real design using the ADC122S051. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the ADC122S051?

The FAN3229TMX, LT3751FE, MCP1790, MCP6002 and MCP9701A appear in the most repositories here.

How big is a typical board using the ADC122S051?

The median is 140 × 85.2 mm, and 100% are two-layer designs.

What is the most popular open source board using the ADC122S051?

By GitHub stars, Kicking Device v13b by TIGERs-Mannheim, with 9 stars.

Can I simulate one of these boards using the ADC122S051 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part