2 open source boards using the ADS124S08

Real designs built with the ADS124S08, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The ADS124S08 in open source designs

The gallery holds 2 open source boards using the ADS124S08 from 2 GitHub repositories; a typical one measures about 71.6 × 60 mm and carries around 112 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is LC DAQ by npgo22.

Microcontrollers on boards using the ADS124S08

ADS124S08: common questions

Where can I find a ADS124S08 reference design?

Each of the 2 boards on this page is a real design using the ADS124S08. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the ADS124S08?

The AP2112K-3.3, LAN8742A, STM32H563RIVx, TCAN1462V and USBLC6-2SC6 appear in the most repositories here.

Which microcontrollers do boards using the ADS124S08 use?

Most are built on STM32 (2).

How big is a typical board using the ADS124S08?

The median is 71.6 × 60 mm, and 0% are two-layer designs.

What is the most popular open source board using the ADS124S08?

By GitHub stars, LC DAQ by npgo22, with 0 stars.

Can I simulate one of these boards using the ADS124S08 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part