4 open source boards using the ADS131M08IPBSR

Real designs built with the ADS131M08IPBSR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The ADS131M08IPBSR in open source designs

The gallery holds 4 open source boards using the ADS131M08IPBSR from 3 GitHub repositories; a typical one measures about 26 × 26 mm and carries around 156 components.

67% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.

The most starred is Freeeeg8-alpha by neuroidss.

Parts used alongside the ADS131M08IPBSR

Microcontrollers on boards using the ADS131M08IPBSR

What boards using the ADS131M08IPBSR are built for

ADS131M08IPBSR: common questions

Where can I find a ADS131M08IPBSR reference design?

Each of the 4 boards on this page is a real design using the ADS131M08IPBSR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ADS131M08IPBSR use?

Most are built on RP2040/RP2350 (1).

How big is a typical board using the ADS131M08IPBSR?

The median is 26 × 26 mm, and 67% are two-layer designs.

What is the most popular open source board using the ADS131M08IPBSR?

By GitHub stars, Freeeeg8-alpha by neuroidss, with 5 stars.

Can I simulate one of these boards using the ADS131M08IPBSR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part