6 open source boards using the ADV7513BSWZ

Real designs built with the ADV7513BSWZ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the ADV7513BSWZ

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the ADV7513BSWZ connects to, and the resistors, capacitors and other passives placed on it.

  • The DVDD pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF).
  • The PVDD pin has a capacitor to GND on 6 of 6 designs, most often 100 nF (then 10 µF).
  • The BGVDD pin has a capacitor to GND on 6 of 6 designs, most often 100 nF (then 10 µF).
  • The R_EXT pin has a resistor to GND on 6 of 6 designs, most often 887 Ω (then 1 kΩ).
DVDDpin 1, 11, 31, 51Connected to: 1.8V 67% · a signal 33%
  • Decoupling capacitor on 100% · 100 nF (47), 10 µF (5), 22 µF (1)
I2S1pin 6Connected to: Not connected 67% · GND 33%
I2S2pin 7Connected to: Not connected 67% · GND 33%
I2S3pin 8Connected to: Not connected 67% · GND 33%
PVDDpin 12Connected to: Signal 67% · 1.8V 33%
  • Capacitor to GND on 100% · 100 nF (10), 10 µF (4), 1 µF (1)
  • Ferrite bead on 33%
BGVDDpin 13Connected to: Signal 67% · 1.8V 33%
  • Capacitor to GND on 100% · 100 nF (10), 10 µF (4), 1 µF (1)
  • Ferrite bead on 33%
R_EXTpin 14Connected to: Signal 100%
  • Resistor to GND on 100% · 887 Ω (5), 1 kΩ (1)
AVDDpin 15, 19, 25Connected to: 1.8V 67% · a signal 33%
  • Decoupling capacitor on 83% · 100 nF (34), 10 µF (6)
HPDpin 16Connected to: A connector 33% · not connected 17%
  • Resistor to GND on 50% · 10 kΩ (3)
PDpin 22Connected to: Signal 83% · GND 17%
  • Resistor to GND on 83% · 2 kΩ (4), 10 kΩ (1)
INTpin 28Connected to: A connector 33% · not connected 17%
  • Pull-up to 3.3V on 50% · 2 kΩ (2), 10 kΩ (1)
DVDD_3Vpin 29Connected to: 3.3V 83% · a signal 17%
  • Decoupling capacitor on 83% · 100 nF (4), 10 µF (3)
CECpin 30Connected to: GND 83% · a signal 17%
CEC_CLKpin 32Connected to: GND 83% · a signal 17%
DDCSCLpin 33Connected to: Signal 83% · not connected 17%
  • Pull-up to 5V on 50% · 2 kΩ (3)
DDCSDApin 34Connected to: Signal 83% · not connected 17%
  • Pull-up to 5V on 67% · 2 kΩ (4)
SCLpin 35Connected to: A connector 33%
  • Series resistor on 67% · 22 Ω (2), 2 kΩ (1)
SDApin 36Connected to: A connector 33%
  • Series resistor on 67% · 22 Ω (2), 2 kΩ (1)
EPpin 65Connected to: GND 100%

41 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include N64Advanced v2 (ADV7513 Version) by borti4938, QMTech-MiSTeX by MiSTeX-devel, DCHDMI by citrus3000psi and XCKU5P-Development-Notes by sjbar03.

The ADV7513BSWZ in open source designs

The gallery holds 6 open source boards using the ADV7513BSWZ from 6 GitHub repositories; a typical one measures about 97.5 × 99.9 mm and carries around 116 components.

67% use four copper layers or more, and 50% carry an open source license.

The most starred is QMTech-MiSTeX by MiSTeX-devel.

Microcontrollers on boards using the ADV7513BSWZ

What boards using the ADV7513BSWZ are built for

ADV7513BSWZ: common questions

Where can I find a ADV7513BSWZ reference design?

Each of the 6 boards on this page is a real design using the ADV7513BSWZ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the ADV7513BSWZ DVDD pin?

The DVDD pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the ADV7513BSWZ.

How is the ADV7513BSWZ PVDD pin connected?

The PVDD pin has a capacitor to GND on 6 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the ADV7513BSWZ.

How is the ADV7513BSWZ BGVDD pin connected?

The BGVDD pin has a capacitor to GND on 6 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the ADV7513BSWZ.

Which microcontrollers do boards using the ADV7513BSWZ use?

Most are built on ESP8266 (1), FPGA (1) and RP2040/RP2350 (1).

How big is a typical board using the ADV7513BSWZ?

The median is 97.5 × 99.9 mm, and 33% are two-layer designs.

What is the most popular open source board using the ADV7513BSWZ?

By GitHub stars, QMTech-MiSTeX by MiSTeX-devel, with 73 stars.

Can I simulate one of these boards using the ADV7513BSWZ before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part