9 open source boards using the AMS1117-5

Real designs built with the AMS1117-5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the AMS1117-5

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the AMS1117-5 connects to, and the resistors, capacitors and other passives placed on it.

  • The VO pin has a decoupling capacitor on 4 of 7 designs, most often 10 µF (then 100 nF).
  • The VI pin has a decoupling capacitor on 4 of 7 designs, most often 10 µF (then 100 nF).
GNDpin 1Connected to: GND 100%
VOpin 2Connected to: 5V 75% · a signal 25%
  • Decoupling capacitor on 57% · 10 µF (4), 100 nF (3)
VIpin 3Connected to: BATT 71% · a signal 29%
  • Decoupling capacitor on 57% · 10 µF (3), 100 nF (1), 22 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include THTIC by MetalMusings, PCB-SAMI-V2.0 by Ezecarp36, Long range remote lora nrf wifi bluetooth by rmingon and LPF Board HF-6m Forte600 by SP6GK.

The AMS1117-5 in open source designs

The gallery holds 9 open source boards using the AMS1117-5 from 7 GitHub repositories; a typical one measures about 80 × 50.9 mm and carries around 42 components.

78% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is THTIC2 by MetalMusings.

Parts used alongside the AMS1117-5

Microcontrollers on boards using the AMS1117-5

AMS1117-5: common questions

Where can I find a AMS1117-5 reference design?

Each of the 9 boards on this page is a real design using the AMS1117-5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the AMS1117-5 VO pin?

The VO pin has a decoupling capacitor on 4 of 7 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 7 open source designs using the AMS1117-5.

What decoupling capacitors do designs use on the AMS1117-5 VI pin?

The VI pin has a decoupling capacitor on 4 of 7 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 7 open source designs using the AMS1117-5.

Which microcontrollers do boards using the AMS1117-5 use?

Most are built on ESP32 (2), STM32 (2) and RP2040/RP2350 (1).

How big is a typical board using the AMS1117-5?

The median is 80 × 50.9 mm, and 78% are two-layer designs.

What is the most popular open source board using the AMS1117-5?

By GitHub stars, THTIC2 by MetalMusings, with 93 stars.

Can I simulate one of these boards using the AMS1117-5 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part