3 open source boards using the ANT016008LCS2442MA2

Real designs built with the ANT016008LCS2442MA2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The ANT016008LCS2442MA2 in open source designs

The gallery holds 3 open source boards using the ANT016008LCS2442MA2 from 2 GitHub repositories; a typical one measures about 12 × 20 mm and carries around 414 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is Step devices by OlinSTEP.

Microcontrollers on boards using the ANT016008LCS2442MA2

What boards using the ANT016008LCS2442MA2 are built for

ANT016008LCS2442MA2: common questions

Where can I find a ANT016008LCS2442MA2 reference design?

Each of the 3 boards on this page is a real design using the ANT016008LCS2442MA2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ANT016008LCS2442MA2 use?

Most are built on TI MSP430/CC (2) and STM32 (1).

How big is a typical board using the ANT016008LCS2442MA2?

The median is 12 × 20 mm, and 0% are two-layer designs.

What is the most popular open source board using the ANT016008LCS2442MA2?

By GitHub stars, Step devices by OlinSTEP, with 3 stars.

Can I simulate one of these boards using the ANT016008LCS2442MA2 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.