5 open source boards using the AP9101CK6

Real designs built with the AP9101CK6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The AP9101CK6 in open source designs

The gallery holds 5 open source boards using the AP9101CK6 from 3 GitHub repositories; a typical one measures about 71.1 × 45.7 mm and carries around 40 components.

80% use four copper layers or more, and 20% carry an open source license.

The most starred is Lipo stamp proto by jamesmunns.

Parts used alongside the AP9101CK6

Microcontrollers on boards using the AP9101CK6

What boards using the AP9101CK6 are built for

AP9101CK6: common questions

Where can I find a AP9101CK6 reference design?

Each of the 5 boards on this page is a real design using the AP9101CK6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the AP9101CK6 use?

Most are built on RP2040/RP2350 (1).

How big is a typical board using the AP9101CK6?

The median is 71.1 × 45.7 mm, and 20% are two-layer designs.

What is the most popular open source board using the AP9101CK6?

By GitHub stars, Lipo stamp proto by jamesmunns, with 17 stars.

Can I simulate one of these boards using the AP9101CK6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part