3 open source boards using the AT29C010A-90JI

Real designs built with the AT29C010A-90JI, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The AT29C010A-90JI in open source designs

The gallery holds 3 open source boards using the AT29C010A-90JI from 3 GitHub repositories; a typical one measures about 123.4 × 96 mm and carries around 40 components.

67% use four copper layers or more, and 0% carry an open source license.

The most starred is DeMoN-Flash-J by gerbilbyte.

Parts used alongside the AT29C010A-90JI

What boards using the AT29C010A-90JI are built for

AT29C010A-90JI: common questions

Where can I find a AT29C010A-90JI reference design?

Each of the 3 boards on this page is a real design using the AT29C010A-90JI. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the AT29C010A-90JI?

The IS61C5128AS-25QLI, MC1455B, 74LS74 and GAL16V8 appear in the most repositories here.

How big is a typical board using the AT29C010A-90JI?

The median is 123.4 × 96 mm, and 33% are two-layer designs.

What is the most popular open source board using the AT29C010A-90JI?

By GitHub stars, DeMoN-Flash-J by gerbilbyte, with 34 stars.

Can I simulate one of these boards using the AT29C010A-90JI before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part