4 open source boards using the AT42QT1070-S
Real designs built with the AT42QT1070-S, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Universal module
renata7zemanova
100 × 100 mm113 parts2LNo license1
STM32Flying Fader
jackr-m
100 × 130 mm89 parts2LNo license0
Tpd
0x007E
50.8 × 50.9 mm13 parts2LCC-BY-NC-4.00
ESP32Semafor bottom
99.9 × 100 mm76 parts2LNo license1
The AT42QT1070-S in open source designs
The gallery holds 4 open source boards using the AT42QT1070-S from 3 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 83 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Universal module by renata7zemanova.
AT42QT1070-S: common questions
Where can I find a AT42QT1070-S reference design?
Each of the 4 boards on this page is a real design using the AT42QT1070-S. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AT42QT1070-S use?
Most are built on ESP32 (2) and STM32 (1).
How big is a typical board using the AT42QT1070-S?
The median is 100 × 100 mm, and 100% are two-layer designs.
What is the most popular open source board using the AT42QT1070-S?
By GitHub stars, Universal module by renata7zemanova, with 1 stars.
Can I simulate one of these boards using the AT42QT1070-S before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.