3 open source boards using the ATF1504AS-xJx44
Real designs built with the ATF1504AS-xJx44, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Z280
transistorfet
100 × 115 mm55 parts4LGPL-3.011Isa post card
ifilot
87.5 × 86.4 mm37 parts2LNo license0Uart
scefrom
135.9 × 41.3 mm16 parts2LCustom license2
The ATF1504AS-xJx44 in open source designs
The gallery holds 3 open source boards using the ATF1504AS-xJx44 from 3 GitHub repositories; a typical one measures about 100 × 86.4 mm and carries around 37 components.
67% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Z280 by transistorfet.
What boards using the ATF1504AS-xJx44 are built for
ATF1504AS-xJx44: common questions
Where can I find a ATF1504AS-xJx44 reference design?
Each of the 3 boards on this page is a real design using the ATF1504AS-xJx44. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the ATF1504AS-xJx44?
The median is 100 × 86.4 mm, and 67% are two-layer designs.
What is the most popular open source board using the ATF1504AS-xJx44?
By GitHub stars, Z280 by transistorfet, with 11 stars.
Can I simulate one of these boards using the ATF1504AS-xJx44 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.