16 open source boards using the ATMEGA1284P-A
Real designs built with the ATMEGA1284P-A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Robust io.before align
lusher00
160 × 100 mm259 parts4LCustom license0AVR/Arduino
Lt counter
janos-raul
145.2 × 87.1 mm72 parts2LGPL-2.00AVR/Arduino
ATmega1284EthernetController
46nori
100 × 80 mm45 parts4LNo license0AVR/Arduino
Avrcraft m644
cnlohr
85.1 × 49.8 mm49 parts2LNo license472AVR/Arduino
HB-UNI-SEN-POOL 2023 05.1
chianti2000
117 × 95 mm69 parts2LNo license3AVR/Arduino
Robust io.before current
lusher00
160 × 100 mm259 parts4LCustom license0AVR/Arduino
Robust io.before fix3
lusher00
160 × 100 mm259 parts4LCustom license0AVR/Arduino
Robust io.before fix4
lusher00
160 × 100 mm259 parts4LCustom license0AVR/Arduino
Robust io.before j20silk
lusher00
160 × 100 mm259 parts4LCustom license0AVR/Arduino
Robust io.before j20smd
lusher00
160 × 100 mm259 parts4LCustom license0AVR/Arduino
Robust io.before r74
lusher00
160 × 100 mm259 parts4LCustom license0AVR/Arduino
Robust io.before tp
lusher00
160 × 100 mm259 parts4LCustom license0AVR/Arduino
Robust io.before xtalgnd
lusher00
160 × 100 mm259 parts4LCustom license0AVR/Arduino
Robust io.before drc cleanup
lusher00
159.1 × 101.4 mm254 parts4LCustom license0AVR/Arduino
Robust io.before footprint update
lusher00
159.1 × 101.4 mm254 parts4LCustom license0AVR/Arduino
Robust io.before spi reroute
lusher00
159.1 × 101.4 mm254 parts4LCustom license0
How designs wire the ATMEGA1284P-A
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ATMEGA1284P-A connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pins have a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
- The XTAL2 pin has a crystal on 5 of 5 designs, most often 20 MHz (then 12 MHz).
- The XTAL1 pin has a crystal on 5 of 5 designs, most often 20 MHz (then 12 MHz).
- The AREF pin has a capacitor to GND on 5 of 5 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| RESETpin 4 | Connected to: A connector 100% |
|
| VCCpin 5, 17, 38 | Connected to: 5V 80% · a signal 20% |
|
| GNDpin 6, 18, 28, 39 | Connected to: GND 100% | — |
| XTAL2pin 7 | Connected to: Signal 100% |
|
| XTAL1pin 8 | Connected to: Signal 100% |
|
| PC0pin 19 | Connected to: A connector 60% |
|
| PC1pin 20 | Connected to: A connector 60% |
|
| PC2pin 21 | Connected to: A connector 60% |
|
| PC3pin 22 | Connected to: A connector 60% |
|
| PC4pin 23 | Connected to: A connector 60% |
|
| PC5pin 24 | Connected to: A connector 60% |
|
| AVCCpin 27 | Connected to: Signal 60% · 3.3V 40% |
|
| AREFpin 29 | Connected to: Signal 80% · 5V 20% |
|
| PA5pin 32 | Connected to: Signal 80% · not connected 20% |
|
| PA2pin 35 | Connected to: Signal 80% · not connected 20% |
|
| PA1pin 36 | Connected to: A connector 40% |
|
| PA0pin 37 | Connected to: A connector 40% |
|
| PB4pin 44 | Connected to: Signal 80% · GND 20% |
|
21 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Avrcraft m644 by cnlohr, HB-UNI-SEN-POOL 2023 05.1 by chianti2000, ATmega1284EthernetController by 46nori and Lt counter by janos-raul.
The ATMEGA1284P-A in open source designs
The gallery holds 16 open source boards using the ATMEGA1284P-A from 5 GitHub repositories; a typical one measures about 160 × 100 mm and carries around 259 components.
81% use four copper layers or more, and 6% carry an open source license.
The most starred is Avrcraft m644 by cnlohr.
Parts used alongside the ATMEGA1284P-A
Microcontrollers on boards using the ATMEGA1284P-A
What boards using the ATMEGA1284P-A are built for
ATMEGA1284P-A: common questions
Where can I find a ATMEGA1284P-A reference design?
Each of the 16 boards on this page is a real design using the ATMEGA1284P-A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the ATMEGA1284P-A VCC pin?
The VCC pins have a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the ATMEGA1284P-A.
How is the ATMEGA1284P-A XTAL2 pin connected?
The XTAL2 pin has a crystal on 5 of 5 designs, most often 20 MHz (then 12 MHz). Counted from the KiCad layouts of 5 open source designs using the ATMEGA1284P-A.
How is the ATMEGA1284P-A XTAL1 pin connected?
The XTAL1 pin has a crystal on 5 of 5 designs, most often 20 MHz (then 12 MHz). Counted from the KiCad layouts of 5 open source designs using the ATMEGA1284P-A.
Which microcontrollers do boards using the ATMEGA1284P-A use?
Most are built on AVR/Arduino (16).
How big is a typical board using the ATMEGA1284P-A?
The median is 160 × 100 mm, and 19% are two-layer designs.
What is the most popular open source board using the ATMEGA1284P-A?
By GitHub stars, Avrcraft m644 by cnlohr, with 472 stars.
Can I simulate one of these boards using the ATMEGA1284P-A before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.