3 open source boards using the ATmega16A-PU

Real designs built with the ATmega16A-PU, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The ATmega16A-PU in open source designs

The gallery holds 3 open source boards using the ATmega16A-PU from 3 GitHub repositories; a typical one measures about 150 × 110 mm and carries around 65 components.

100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is I2c test terminal by dilshan.

Microcontrollers on boards using the ATmega16A-PU

AVR/Arduino 3

What boards using the ATmega16A-PU are built for

ATmega16A-PU: common questions

Where can I find a ATmega16A-PU reference design?

Each of the 3 boards on this page is a real design using the ATmega16A-PU. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ATmega16A-PU use?

Most are built on AVR/Arduino (3).

How big is a typical board using the ATmega16A-PU?

The median is 150 × 110 mm, and 100% are two-layer designs.

What is the most popular open source board using the ATmega16A-PU?

By GitHub stars, I2c test terminal by dilshan, with 20 stars.

Can I simulate one of these boards using the ATmega16A-PU before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.