6 open source boards using the ATMEGA328PB

Real designs built with the ATMEGA328PB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the ATMEGA328PB

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ATMEGA328PB connects to, and the resistors, capacitors and other passives placed on it.

  • The AVCC pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF.
  • The VCC pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 10 µF).
  • The PD7 pin is left unconnected on 4 of 5 designs.
  • The XTAL1/PB6 pin has a capacitor to GND on 3 of 5 designs, most often 24 pF (then 22 pF).
PD4pin 2Connected to: Not connected 60% · a signal 40%
PE0pin 3Connected to: Not connected 60% · a signal 40%
VCCpin 4Connected to: VCC 100%
  • Decoupling capacitor on 80% · 100 nF (4), 10 µF (1)
GNDpin 5, 21Connected to: GND 100%
PE1pin 6Connected to: Not connected 60% · a signal 40%
XTAL1/PB6pin 7Connected to: Signal 60% · not connected 40%
  • Capacitor to GND on 60% · 24 pF (1), 22 pF (1), 33 pF (1)
  • Crystal on 60% · 16 MHz (1), 3.6864 MHz (1)
XTAL2/PB7pin 8Connected to: Signal 60% · not connected 40%
  • Capacitor to GND on 60% · 24 pF (1), 22 pF (1), 33 pF (1)
  • Crystal on 60% · 16 MHz (1), 3.6864 MHz (1)
PD7pin 11Connected to: Not connected 80% · a signal 20%
PB0pin 12Connected to: Not connected 60% · a signal 40%
PB2pin 14Connected to: Not connected 60% · a signal 40%
AVCCpin 18Connected to: VCC 80% · a signal 20%
  • Decoupling capacitor on 100% · 100 nF (6)
AREFpin 20Connected to: Not connected 60% · 3.3V 20% · a signal 20%
  • Capacitor to GND on 40% · 100 nF (4)
PC2pin 25Connected to: Not connected 60% · a signal 40%
PC3pin 26Connected to: Not connected 60% · a signal 40%
PC4pin 27Connected to: Signal 60% · not connected 40%
  • Pull-up to 5V on 40% · 1 kΩ (1), 2 kΩ (1)
PC5pin 28Connected to: Signal 60% · not connected 40%
  • Pull-up to 5V on 40% · 1 kΩ (1), 2 kΩ (1)
RESET/PC6pin 29Connected to: A connector 40% · not connected 20%
  • Pull-up to VCC on 60% · 10 kΩ (2), 4.7 kΩ (1)

14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include TR-808-Clone by minisystem, Sgikbd by jtsiomb, Multi channel by LilyTronics and AAQuad-Evolution by Fberbari.

The ATMEGA328PB in open source designs

The gallery holds 6 open source boards using the ATMEGA328PB from 5 GitHub repositories; a typical one measures about 80 × 67.1 mm and carries around 40 components.

100% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.

The most starred is TR-808-Clone by minisystem.

Microcontrollers on boards using the ATMEGA328PB

What boards using the ATMEGA328PB are built for

ATMEGA328PB: common questions

Where can I find a ATMEGA328PB reference design?

Each of the 6 boards on this page is a real design using the ATMEGA328PB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the ATMEGA328PB AVCC pin?

The AVCC pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the ATMEGA328PB.

What decoupling capacitors do designs use on the ATMEGA328PB VCC pin?

The VCC pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the ATMEGA328PB.

How is the ATMEGA328PB PD7 pin connected?

The PD7 pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the ATMEGA328PB.

Which microcontrollers do boards using the ATMEGA328PB use?

Most are built on AVR/Arduino (5) and ESP32 (1).

How big is a typical board using the ATMEGA328PB?

The median is 80 × 67.1 mm, and 100% are two-layer designs.

What is the most popular open source board using the ATMEGA328PB?

By GitHub stars, TR-808-Clone by minisystem, with 67 stars.

Can I simulate one of these boards using the ATMEGA328PB before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part