4 open source boards using the ATmega32A-AU

Real designs built with the ATmega32A-AU, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The ATmega32A-AU in open source designs

The gallery holds 4 open source boards using the ATmega32A-AU from 4 GitHub repositories; a typical one measures about 90 × 74.8 mm and carries around 89 components.

100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is C-13X-PCB by ramonimbao.

Microcontrollers on boards using the ATmega32A-AU

What boards using the ATmega32A-AU are built for

ATmega32A-AU: common questions

Where can I find a ATmega32A-AU reference design?

Each of the 4 boards on this page is a real design using the ATmega32A-AU. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ATmega32A-AU use?

Most are built on AVR/Arduino (3) and STM32 (1).

How big is a typical board using the ATmega32A-AU?

The median is 90 × 74.8 mm, and 100% are two-layer designs.

What is the most popular open source board using the ATmega32A-AU?

By GitHub stars, C-13X-PCB by ramonimbao, with 16 stars.

Can I simulate one of these boards using the ATmega32A-AU before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part