4 open source boards using the ATSAMD11D14A-M

Real designs built with the ATSAMD11D14A-M, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The ATSAMD11D14A-M in open source designs

The gallery holds 4 open source boards using the ATSAMD11D14A-M from 4 GitHub repositories; a typical one measures about 55.2 × 45.1 mm and carries around 69 components.

50% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is D lev io rounded by wormyrocks.

Parts used alongside the ATSAMD11D14A-M

Microcontrollers on boards using the ATSAMD11D14A-M

ATSAMD11D14A-M: common questions

Where can I find a ATSAMD11D14A-M reference design?

Each of the 4 boards on this page is a real design using the ATSAMD11D14A-M. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ATSAMD11D14A-M use?

Most are built on Microchip SAM (3) and AVR/Arduino (1).

How big is a typical board using the ATSAMD11D14A-M?

The median is 55.2 × 45.1 mm, and 50% are two-layer designs.

What is the most popular open source board using the ATSAMD11D14A-M?

By GitHub stars, D lev io rounded by wormyrocks, with 0 stars.

Can I simulate one of these boards using the ATSAMD11D14A-M before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part