4 open source boards using the ATSAMD21G18

Real designs built with the ATSAMD21G18, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The ATSAMD21G18 in open source designs

The gallery holds 4 open source boards using the ATSAMD21G18 from 2 GitHub repositories; a typical one measures about 69.5 × 60.6 mm and carries around 60 components.

75% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is AvionicsBoard by djmallek.

Parts used alongside the ATSAMD21G18

Microcontrollers on boards using the ATSAMD21G18

What boards using the ATSAMD21G18 are built for

ATSAMD21G18: common questions

Where can I find a ATSAMD21G18 reference design?

Each of the 4 boards on this page is a real design using the ATSAMD21G18. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ATSAMD21G18 use?

Most are built on Microchip SAM (3) and Nordic nRF (1).

How big is a typical board using the ATSAMD21G18?

The median is 69.5 × 60.6 mm, and 75% are two-layer designs.

What is the most popular open source board using the ATSAMD21G18?

By GitHub stars, AvionicsBoard by djmallek, with 1 stars.

Can I simulate one of these boards using the ATSAMD21G18 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part