3 open source boards using the ATtiny2313-20PU
Real designs built with the ATtiny2313-20PU, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
US Board1
team5985
50 × 50 mm7 parts2LNo license0AVR/Arduino
Pmd keyface
z00m128
54.7 × 43.7 mm24 parts2LCC-BY-NC-4.09AVR/Arduino
H4n2rs485
mwwhited
38.1 × 44.5 mm17 parts2LMIT1
The ATtiny2313-20PU in open source designs
The gallery holds 3 open source boards using the ATtiny2313-20PU from 3 GitHub repositories; a typical one measures about 50 × 44.5 mm and carries around 17 components.
100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Pmd keyface by z00m128.
Microcontrollers on boards using the ATtiny2313-20PU
What boards using the ATtiny2313-20PU are built for
ATtiny2313-20PU: common questions
Where can I find a ATtiny2313-20PU reference design?
Each of the 3 boards on this page is a real design using the ATtiny2313-20PU. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ATtiny2313-20PU use?
Most are built on AVR/Arduino (3).
How big is a typical board using the ATtiny2313-20PU?
The median is 50 × 44.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the ATtiny2313-20PU?
By GitHub stars, Pmd keyface by z00m128, with 9 stars.
Can I simulate one of these boards using the ATtiny2313-20PU before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.