2 open source boards using the ATtiny3226-S
Real designs built with the ATtiny3226-S, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/ArduinoMyGenWashy
mayermakes
147.8 × 106.3 mm54 parts2LGPL-3.011
AVR/ArduinoSalp board
aeiou642
64.8 × 58.7 mm57 parts4LNo license2
The ATtiny3226-S in open source designs
The gallery holds 2 open source boards using the ATtiny3226-S from 2 GitHub repositories; a typical one measures about 106.3 × 82.5 mm and carries around 56 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is MyGenWashy by mayermakes.
Microcontrollers on boards using the ATtiny3226-S
ATtiny3226-S: common questions
Where can I find a ATtiny3226-S reference design?
Each of the 2 boards on this page is a real design using the ATtiny3226-S. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ATtiny3226-S use?
Most are built on AVR/Arduino (2).
How big is a typical board using the ATtiny3226-S?
The median is 106.3 × 82.5 mm, and 50% are two-layer designs.
What is the most popular open source board using the ATtiny3226-S?
By GitHub stars, MyGenWashy by mayermakes, with 11 stars.
Can I simulate one of these boards using the ATtiny3226-S before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.