4 open source boards using the ATWINC1500-MR210PB
Real designs built with the ATWINC1500-MR210PB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
4-layer panel
bfrigon
99.1 × 91.4 mm90 parts2LCC-BY-SA-4.018STM32
WeatherStation mfg
ppusapati
100 × 80 mm117 parts4LNo license0AVR/Arduino
Motherboard
bfrigon
99.1 × 39.4 mm76 parts2LCC-BY-SA-4.018ESP32
WeatherStation
ppusapati
100 × 80 mm91 parts4LNo license0
The ATWINC1500-MR210PB in open source designs
The gallery holds 4 open source boards using the ATWINC1500-MR210PB from 2 GitHub repositories; a typical one measures about 99.5 × 80 mm and carries around 91 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is 4-layer panel by bfrigon.
Microcontrollers on boards using the ATWINC1500-MR210PB
What boards using the ATWINC1500-MR210PB are built for
ATWINC1500-MR210PB: common questions
Where can I find a ATWINC1500-MR210PB reference design?
Each of the 4 boards on this page is a real design using the ATWINC1500-MR210PB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ATWINC1500-MR210PB use?
Most are built on AVR/Arduino (2), ESP32 (1) and STM32 (1).
How big is a typical board using the ATWINC1500-MR210PB?
The median is 99.5 × 80 mm, and 50% are two-layer designs.
What is the most popular open source board using the ATWINC1500-MR210PB?
By GitHub stars, 4-layer panel by bfrigon, with 18 stars.
Can I simulate one of these boards using the ATWINC1500-MR210PB before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.