5 open source boards using the BQ25180

Real designs built with the BQ25180, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The BQ25180 in open source designs

The gallery holds 5 open source boards using the BQ25180 from 3 GitHub repositories; a typical one measures about 110.9 × 59.8 mm and carries around 128 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is GC Ultimate Main Board R5 by HandHeldLegend.

Microcontrollers on boards using the BQ25180

What boards using the BQ25180 are built for

BQ25180: common questions

Where can I find a BQ25180 reference design?

Each of the 5 boards on this page is a real design using the BQ25180. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the BQ25180?

The GD25Q80EEIGR, LSM6DSRTR, RP2040, TPS63001DRCR and USBLC6-2P6 appear in the most repositories here.

Which microcontrollers do boards using the BQ25180 use?

Most are built on RP2040/RP2350 (4) and Nordic nRF (1).

How big is a typical board using the BQ25180?

The median is 110.9 × 59.8 mm, and 0% are two-layer designs.

What is the most popular open source board using the BQ25180?

By GitHub stars, GC Ultimate Main Board R5 by HandHeldLegend, with 61 stars.

Can I simulate one of these boards using the BQ25180 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part