6 open source boards using the BQ25601
Real designs built with the BQ25601, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ZC95 MKII
CrashOverride85
191.5 × 76 mm319 parts2LGPL-3.0115ESP32
HorseSense
Philippe12
35 × 55.3 mm63 parts4LNo license0- schematic only · 65 parts
LazerGamebox
7kasper
65 partsNo license0 RP2040/RP2350
Output
CrashOverride85
60.3 × 139.1 mm116 parts2LGPL-3.0115STM32
Gk
jncronin
120.7 × 110 mm245 parts6LNo license78PanelControls
CrashOverride85
106 × 37.8 mm40 parts2LGPL-3.0115
The BQ25601 in open source designs
The gallery holds 6 open source boards using the BQ25601 from 4 GitHub repositories; a typical one measures about 106 × 76 mm and carries around 91 components.
60% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is ZC95 MKII by CrashOverride85.
Parts used alongside the BQ25601
Microcontrollers on boards using the BQ25601
What boards using the BQ25601 are built for
BQ25601: common questions
Where can I find a BQ25601 reference design?
Each of the 6 boards on this page is a real design using the BQ25601. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the BQ25601 use?
Most are built on ESP32 (1), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the BQ25601?
The median is 106 × 76 mm, and 60% are two-layer designs.
What is the most popular open source board using the BQ25601?
By GitHub stars, ZC95 MKII by CrashOverride85, with 115 stars.
Can I simulate one of these boards using the BQ25601 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.