2 open source boards using the BQ76905RGRR
Real designs built with the BQ76905RGRR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Esp32-s3 single motor & battery controller
techy-robot
44.9 × 42 mm101 parts4LCERN-OHL-S-2.012WCH CH32/CH55x
CACKLE-PSU-2s 40A PSU and charger
techy-robot
45 × 20 mm95 parts4LCC-BY-NC-4.00
The BQ76905RGRR in open source designs
The gallery holds 2 open source boards using the BQ76905RGRR from 2 GitHub repositories; a typical one measures about 45 × 31 mm and carries around 98 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is Esp32-s3 single motor & battery controller by techy-robot.
Parts used alongside the BQ76905RGRR
Microcontrollers on boards using the BQ76905RGRR
What boards using the BQ76905RGRR are built for
BQ76905RGRR: common questions
Where can I find a BQ76905RGRR reference design?
Each of the 2 boards on this page is a real design using the BQ76905RGRR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the BQ76905RGRR use?
Most are built on WCH CH32/CH55x (1) and ESP32 (1).
How big is a typical board using the BQ76905RGRR?
The median is 45 × 31 mm, and 0% are two-layer designs.
What is the most popular open source board using the BQ76905RGRR?
By GitHub stars, Esp32-s3 single motor & battery controller by techy-robot, with 12 stars.
Can I simulate one of these boards using the BQ76905RGRR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.