8 open source boards using the C32565
Real designs built with the C32565, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
DiyBMSv4Leaf
stuartpittaway
218 × 30 mm76 parts2LCC-BY-NC-4.023RP2040/RP2350
OpenPEMF
openPEMF
49.7 × 99.8 mm113 parts4LMIT0AVR/Arduino
ESP8266ControllerCircuit
remyar
53.3 × 68.6 mm29 parts2LNo license0ESP32
DIYBMS ESP32 Controller
stuartpittaway
122.5 × 87.6 mm90 parts2LCC-BY-NC-4.01.1kESP8266
ESP8266ControllerCircuit
orgTestCodacy11KRepos110MB
75 × 30 mm20 parts2LCC-BY-NC-4.00ESP8266
ESP8266ControllerCircuit
Arkariusz
75 × 30 mm20 parts2LCC-BY-NC-4.00ESP8266
ESP8266ControllerCircuit
chipsi
75 × 30 mm20 parts2LCC-BY-NC-4.00ESP8266
ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1k
How designs wire the C32565
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the C32565 connects to, and the resistors, capacitors and other passives placed on it.
- The 1 pin has a series resistor on 6 of 7 designs, most often 220 Ω (then 180 Ω).
- The 2 pin is tied to GND on 6 of 7 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 1pin 1 | Connected to: Signal 100% |
|
| 2pin 2 | Connected to: GND 86% | — |
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DIYBMS ESP32 Controller by stuartpittaway, DiyBMSv4Leaf by stuartpittaway, ESP8266ControllerCircuit by Arkariusz and ESP8266ControllerCircuit by chipsi.
The C32565 in open source designs
The gallery holds 8 open source boards using the C32565 from 7 GitHub repositories; a typical one measures about 75 × 30 mm and carries around 25 components.
88% are two-layer designs, the rest use four layers or more, and 13% carry an open source license.
The most starred is DIYBMS ESP32 Controller by stuartpittaway.
Parts used alongside the C32565
Microcontrollers on boards using the C32565
What boards using the C32565 are built for
C32565: common questions
Where can I find a C32565 reference design?
Each of the 8 boards on this page is a real design using the C32565. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the C32565 1 pin?
The 1 pin has a series resistor on 6 of 7 designs, most often 220 Ω (then 180 Ω). Counted from the KiCad layouts of 7 open source designs using the C32565.
How is the C32565 2 pin connected?
The 2 pin is tied to GND on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the C32565.
Which microcontrollers do boards using the C32565 use?
Most are built on ESP8266 (4), AVR/Arduino (2), ESP32 (1) and RP2040/RP2350 (1).
How big is a typical board using the C32565?
The median is 75 × 30 mm, and 88% are two-layer designs.
What is the most popular open source board using the C32565?
By GitHub stars, DIYBMS ESP32 Controller by stuartpittaway, with 1,143 stars.
Can I simulate one of these boards using the C32565 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.