7 open source boards using the C347222
Real designs built with the C347222, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Rp2040 8key
kata0510
110 × 38.3 mm52 parts2LMIT4STM32
Polaris
avaninder
52.6 × 33.8 mm39 parts4LNo license1AVR/Arduino
Ripple tank
practable
100 × 100 mm89 parts4LAGPL-3.00ESP32
SDR-IoT-Board
Patricknmaina
75.5 × 82.7 mm86 parts4LMIT0ESP32
Open kinematic array
deanarvan
22 × 28 mm33 parts4LMIT0ESP32
OBCv2
AfriOrbit
80.5 × 80.5 mm30 parts4LNo license0Usb
google
15.9 × 23.5 mm12 parts2LApache-2.02.9k
How designs wire the C347222
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the C347222 connects to, and the resistors, capacitors and other passives placed on it.
- The VO pin has a decoupling capacitor on 5 of 7 designs, most often 10 µF (then 100 nF).
- The VI pin has a decoupling capacitor on 5 of 7 designs, most often 10 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| VOpin 2 | Connected to: 3.3V 100% |
|
| VIpin 3 | Connected to: 5V 57% · a signal 43% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Usb by google, Rp2040 8key by kata0510, Polaris by avaninder and OBCv2 by AfriOrbit.
The C347222 in open source designs
The gallery holds 7 open source boards using the C347222 from 7 GitHub repositories; a typical one measures about 75.5 × 38.3 mm and carries around 39 components.
71% use four copper layers or more, and 71% carry an open source license.
The most starred is Usb by google.
Microcontrollers on boards using the C347222
What boards using the C347222 are built for
C347222: common questions
Where can I find a C347222 reference design?
Each of the 7 boards on this page is a real design using the C347222. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the C347222 VO pin?
The VO pin has a decoupling capacitor on 5 of 7 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 7 open source designs using the C347222.
What decoupling capacitors do designs use on the C347222 VI pin?
The VI pin has a decoupling capacitor on 5 of 7 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 7 open source designs using the C347222.
Which microcontrollers do boards using the C347222 use?
Most are built on ESP32 (3), AVR/Arduino (1), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the C347222?
The median is 75.5 × 38.3 mm, and 29% are two-layer designs.
What is the most popular open source board using the C347222?
By GitHub stars, Usb by google, with 2,945 stars.
Can I simulate one of these boards using the C347222 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.