5 open source boards using the C45874
Real designs built with the C45874, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
The manta75
mymakercorner
312.3 × 138.8 mm197 parts2LCC-BY-4.022AVR/Arduino
Bemini atmel mu
ianklug
200 × 65 mm43 parts2LCC-BY-SA-4.055AVR/Arduino
Grooveboard atmel mu
ianklug
118.1 × 22.9 mm24 parts2LCC-BY-SA-4.058AVR/Arduino
Grooveboard choc atmel mu
ianklug
118.1 × 22.9 mm24 parts2LCC-BY-SA-4.058AVR/Arduino
Grooveboard mx atmel mu
ianklug
118.1 × 22.9 mm24 parts2LCC-BY-SA-4.058
The C45874 in open source designs
The gallery holds 5 open source boards using the C45874 from 3 GitHub repositories; a typical one measures about 118.1 × 22.9 mm and carries around 24 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Grooveboard atmel mu by ianklug.
Microcontrollers on boards using the C45874
What boards using the C45874 are built for
C45874: common questions
Where can I find a C45874 reference design?
Each of the 5 boards on this page is a real design using the C45874. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the C45874 use?
Most are built on AVR/Arduino (5).
How big is a typical board using the C45874?
The median is 118.1 × 22.9 mm, and 100% are two-layer designs.
What is the most popular open source board using the C45874?
By GitHub stars, Grooveboard atmel mu by ianklug, with 58 stars.
Can I simulate one of these boards using the C45874 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.